Fixed Point Clamp FS (5'') 139
Group: 1380
Part number 160104
This is a replacement for Old Productname (Part number 123456).
For fixed point installations in combination with mounting kits
Absorbs axial loads in both directions thanks to symmetric construction
Mounting kit and braces required; dimensioning advice available for loads up to 35 kN
Technical Data
B1 | 244 mm |
b1 | 100 mm |
D | 140 mm |
D1 | 140 mm |
d | 17 mm |
e | 196 mm |
H | 166,8 mm |
Mi1 | M16 |
SA | AF24 |
SG | M16 |
SL | 60 mm |
t | 6 mm |
Complete with 4 clamping bolts and 4 nuts M16, from size 108 mm onwards with spring inserts.
Clamping bolts, nuts and spring inserts are pre-assembled and secured against falling out.
Technical specifications
Primary element material | steel |
Connecting element material | steel |
Surface finish | electro galvanized (Fe//Zn) |
Corrosion protection class | C2 |
Certification
Installation
Tighten clamping bolts equally with the torque M as mentioned in the table.
Note: Tightening torque for combination FP clamp with steel pipe DIN EN 10220 / normal wall thickness. For pipes with smaller wall thickness or other material, the values have to be reduced.
| Type | Tightening torque |
|---|---|
| 21,3 ... 48,3 | 50 Nm |
| 57 mm ... 88,9 | 80 Nm |
| 108 mm ... 521 mm | 100 Nm |